Flash Drive Information Extractor (also known as GetFlashInfo) is a highly specialized, portable freeware utility developed by ANTSpec Software. It queries a USB flash drive’s internal controller microcode to extract advanced, low-level technical specifications.
Unlike basic system tools that only show partition structures, this software interacts directly with the hardware. It is primarily used by IT professionals and hardware enthusiasts to identify fake flash drives, diagnose dead hardware, and find the correct firmware flashing tools to repair corrupted devices. Key Data Extracted by the Tool
When you run the tool, it pulls a massive amount of technical parameters from the chip:
Controller Model: Identifies the exact brand and model of the internal microcontroller (e.g., Phison, Silicon Motion, Alcor, Innostor).
Possible Memory Chip(s): Determines the exact flash memory NAND chip installed, even if the manufacturer has scrubbed or laser-re-marked the physical casing.
VID & PID: Displays the Vendor ID and Product ID, which are mandatory hexadecimal codes used by Windows to identify the device manufacturer and model.
Flash ID: Provides the unique hardware identity code of the NAND flash memory.
Physical & Windows Capacity: Displays the real physical size of the silicon layout versus what the Windows operating system reports, helping to expose spoofed storage limits.
Firmware Details: Extracts the microcode version (MP Ver.), firmware date, and information about the flash memory channels and Chip Enable (Flash CE) configurations. Core Hardware Constraints & Limitations
The utility is highly specific about what hardware it will recognize:
USB Sticks Only: It is hardcoded to communicate exclusively with standard USB flash drives.
Unsupported Devices: It will not read or respond to USB card readers, external SD/microSD cards, smartphones, MP3 players, dashcams, or digital cameras.
OS Support: It runs natively across almost all Windows versions, including legacy editions (Windows 2000, XP, Vista, 7, 8, 8.1, and Windows ⁄11). Step-by-Step Operation Guide
Because the tool functions at a low hardware tier, you must follow specific steps to prevent data reading conflicts:
Insert the USB Drive: Connect your flash drive directly to a computer port.
Wait for Initialization: Do not open the program immediately. Wait 20 to 30 seconds to ensure Windows fully initializes the drive’s file table and drivers.
Close Conflicting Software: Ensure no low-level tools, formatting programs, or partition managers are open simultaneously, as they will block hardware access and cause incorrect read errors.
Run the Utility: Open the application (it is portable and requires no installation) and click the “Get USB Flash Drive Information” button.
Analyze or Repeat: The output parameters will display within a few seconds. If you swap drives or need to run another scan, you must completely restart the application to refresh its memory. Practical Use Cases 1. Exposing Fake Flash Drives
Scammers often take cheap 8GB flash drives and modify their firmware to report as a 512GB or 1TB drive to Windows. When you use this tool, it bypasses the fake Windows partition data and tells you the exact physical capacity of the underlying NAND chip, instantly revealing if the device is a counterfeit. 2. Repairing a Corrupted “Dead” Drive
If a flash drive becomes write-protected, unformattable, or completely unrecognized by Windows, the internal firmware is likely corrupted. You can feed the precise Controller Model and VID/PID extracted by this tool into specialized archives like USBDev to download the exact manufacturer production tool needed to re-flash and revive the hardware.
Warning: Running actual manufacturer repair utilities will permanently delete all files on the drive, so you should only use them if you are attempting to salvage the broken hardware rather than recover lost documents.
If you are dealing with a malfunctioning USB drive, tell me the current symptoms it is showing (e.g., “write-protected error,” “not showing up in Windows,” “wrong capacity size”). I can guide you on how to interpret your extraction results or point you toward the right repair steps! FlashBoot.ru Flash Drive Information Extractor 8.5.0.590 – FlashBoot.ru
Файлы на ней есть и их видно, но не форматироваться, не удалять/сохранять не хочет.валерий * 28 декабря 2014, 21:35. WonderHowTo How to Make Your Own Bad USB – Null Byte – WonderHowTo
Leave a Reply